1 Polímeros 2008 Vol: 18(1):. DOI: 10.1590/S0104-14282008000100009

Evaluación de la adherencia de uniones adhesivas metálicas con adhesivos epoxídicos modificados

In this work the adhesive properties of epoxy resins based on diglycidyl ether of bisphenol A have been evaluated. The epoxy resin was modified with butadiene and acrylic copolymers to obtain toughened adhesives. The aliphatic primary amines triethylenetetramine, N-(2-aminoethyl)piperazine and isophorone diamine were investigated as curing agents. The adhesive properties were investigated using the epoxy resins as independent systems as well as the modified resin. The adhesive properties of modified and unmodified epoxy resins were studied using steel alloy (ASTM A36) as adherent. The adherence has been evaluated using three geometric assays of steel-steel bonded joints. The rheological behavior of the adhesives was investigated under isothermal conditions. The rheological parameters associated with the curing reaction such as reaction rate, pot life and gel time of the pure adhesives were related to the chemical structure of the curing agents. The cloud point and the gel time of the modified adhesives were related to the morphology and the reaction rate, respectively. The morphology was characterized by scanning electronic microscopy. The adherence of the adhesive joints at different mechanical solicitations was related to the generated morphology by the dispersed phase of each modifier and the networks structures of the epoxy adhesives.

Mentions
Figures
Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6
Altmetric
References
  1. Pascault, J. P.; Sautereau, H.; Verdu, J. & Williams R. J. J. - "Thermosetting Polymers", Marcel Dekker, Inc., New York , (2002) .
  2. Williams, R. J. J.; Rozenberg, B. A. & Pascault, J. P. - Advances in Polymer Science, 128, p.95 , (1997) .
  3. Kar, S. & Banthia, A. K. - Journal of Applied of Polymer Science, 92, p.(2004) , (3814) .
  4. Ratna, D.; Banthia, A. K. & Deb, P. C. - Journal of Applied of Polymer Science, 80, p.(2001) , (1792) .
  5. González Garcia F.; Miguez, E. & Tavares M. I. B. - "Caracterización cualitativa de poliaminas libres en endurecedores de resinas epoxídicas del tipo etilenaminas por espectroscopia de resonancia magnética nuclear" - Polímeros: Ciência e Tecnología, aceptado el 14 de agosto de , (2007) .
  6. González Garcia F.; Soares, B. G.; Neves A. F. & Oliveira M. G. - "Modificación de polímeros termorrígidos por separación de fases inducida por reacción química. Sistema éter diglicidílico del bisfenol-A y trietilentetramina con copolímeros acrílicos". - Polímeros: Ciência e Tecnología, aceptado el 14 de agosto de , (2007) .
  7. González Garcia F.; Soares, B. G.; Pita, V. J. R. R.; Sánchez, R. & Rieumont, J. - Journal of Applied Polymer Science, 107, p.(2007) , (2047) .
  8. González Garcia F.; Miguez, E. & Soares, B. G. - Polímeros: Ciência e Tecnologia, 15, p.261 , (2005) .
  9. González Garcia F.; Soares, B. G. & Sampaio, E. M. - "Epoxy Adhesive modified with 2-ethylhexylacrylate-methyl methacrylate copolymer 1. Influence of molecular weight and carboxyl group concentration on adhesive properties", in: Annals of World Polymer Congress - Macro 41st International Symposium on Macromolecules, Rio de Janeiro - RJ, july (2006). Publicado en medio digital (CD-Rom) , (2006) .
  10. González Garcia F.; Soares, B. G. & Sampaio, E. M. - "Epoxy Adhesive modified with 2-ethylhexylacrylate-methyl methacrylate copolymer 2. Influence of modifier concentration on adhesive properties", in: Annals of World Polymer Congress - Macro 41st International Symposium on Macromolecules, Rio de Janeiro - RJ, july (2006). Publicado en medio digital (CD-Rom) , (2006) .
  11. González Garcia F.; Pires Lopes, M. A.; Rodrigues Jr, F. C. & Sampaio, E. M. - "Epoxy Adhesive modified with 2-ethylhexylacrylate-methyl methacrylate copolymer 3. Influence of epoxy hardener on adhesive properties", en: Annals of World Polymer Congress - Macro 41st International Symposium on Macromolecules, Rio de Janeiro - RJ, july (2006). Publicado en medio digital (CD-Rom) , (2006) .
  12. González Garcia F.; Pires Lopes, M. A.; Rodrigues Jr, F. C. & Sampaio, E. M. - "Estudo comparativo da aderência de diferentes adesivos epoxídicos. Influência do tratamento com água destilada". 9º Congresso Brasileiro de Polímeros, Campina Grande - PB, outubro. Publicado en medio digital (CD-Rom) , (2007) .
  13. Sampaio, E. M.; González Garcia F.; Limaverde, A. M.; Da Silva H. M. F. T. A. & Perrut, V. A. - "Aderência de juntas metálicas de cisalhamento coladas com adesivos epoxídicos de baixa e alta viscosidade", in: Anais do 17º CBECIMat; Congresso Brasileiro de Engenharia e Ciência dos Materiais, Foz de Iguaçu - Paraná, novembro. Publicado en medio digital (CD-Rom) , (2006) .
  14. González Garcia F.; Pires Lopes, M. A.; Rodrigues Jr, F. C. & Sampaio, E. M. - "Estudo da aderência de juntas metálicas coladas com adesivos epoxídicos modificados", in: Anais do 17º CBECIMat; Congresso Brasileiro de Engenharia e Ciência dos Materiais, Foz de Iguaçu - Paraná, novembro. Publicado en medio digital (CD-Rom) , (2006) .
  15. González Garcia F.; Rodrigues Jr, F. C.; Pires Lopes, M. A. Sampaio E. M. & Bruno Tavares, M. I. - "Avaliação da aderência de juntas de cisalhamento coladas com adesivos modificados usando endurecedores do tipo poliaminas alifáticas", in: Anais do 17º CBECIMat; Congresso Brasileiro de Engenharia e Ciência dos Materiais, Foz de Iguaçu - Paraná, novembro. Publicado en medio digital (CD-Rom) , (2006) .
  16. González Garcia F.; Costa, A. P. M.; Da Silva, P. M.; González, M. E. & Soares, B. G. - "Adesivos para reparo de dutos utilizados no transporte de petróleo e gás natural", in: Anais do 8º Congresso Brasileiro de Polímeros, Águas de Lindóia - SP, novembro. Publicado en medio digital (CD-Rom) , (2005) .
  17. González Garcia F.; Costa, A. P. M.; Da Silva, P. M.; Miguez, E. & Soares, B. G. - "Determinação da composição de copolímeros de poli(metacrilato de metila)-co-poli(acrilato de 2-etilhexila) por espectroscopia de RMN-1H", in: Anais do 8º Congresso Brasileiro de Polímeros, Águas de Lindóia - SP, novembro. Publicado en medio digital (CD-Rom) , (2005) .
  18. González Garcia F.; Da Silva, P. M. & Soares, B. G. - "Determinação do equivalente de hidrogênio amínico en endurecedores de resinas epoxídicas do tipo poliamina alifática", in: Anais do 8º Congresso Brasileiro de Polímeros, Águas de Lindóia - SP, novembro. Publicado en medio digital (CD-Rom) , (2005) .
  19. González Garcia F. & Soares, B. G. - "Toughened epoxy adhesives for the petroleum industry", in: Annals of X International Macromolecular Colloquium, Gramado - RS, april. Publicado en medio digital (CDRom) , (2005) .
  20. McAdams, L. V. & Gannon, J. A. - "Epoxy Resin", in: Encyclopedia of Polymer Science and Engineering" 6, pag.322, A Wiley-Interscience Publication, John Wiley & Sons, Inc., New York , (1986) .
  21. Taib, A. A.; Boukhili, R.; Achiou, S.; Gordon, S. & Boukehili, H. - International Journal of Adhesion and Adhesives, 26, p.226 , (2006) .
  22. Da Silva, L. F. M & Adams, R. D. - International Journal of Adhesion and Adhesives, 22, p.202 , (2002) .
  23. Li, W.; Blunt, L. & Stout, K. J. - International Journal of Adhesion and Adhesives, 17, p.303 , (1997) .
  24. American Society for Testing and Materials. ASTM D- 01. "Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal)". Copyright 2004 , (1002) .
  25. American Society for Testing and Materials. ASTM D- 01. "Standard test method for peel resistance of adhesives (T-peel test)". Copyright 2004 , (1876) .
  26. American Society for Testing and Materials. ASTM D- 02. "Standard test method for tensile strength of adhesives by means of bar of rod specimens". Copyright 2004 , (2095) .
  27. American Society for Testing and Materials. ASTM D 950 - 72. "Standard method for test for impact strength of adhesive bonds" , .
  28. Bezemer, A. A.; Guyt, C. B. & Vlot, A. - International Journal of Adhesion and Adhesives, 18, p.255 , (1998) .
  29. González Garcia F.; Da Silva, P. M.; Soares, B. G. & Rieumont, J. - Polymer Testing 26, p.95 , (2007) .
  30. González Garcia F. & Soares, B. G. - Polymer Testing, 22, p.51 , (2003) .
  31. American Society for Testing and Materials. ASTM D- 97. "Standard test methods for epoxy content of epoxy resins" (1997) , (1652) .
  32. Lee, H. & Neville, K. - "Handbook of Epoxy Resins", McGraw-Hill, Inc., New York , (1967) .
  33. Lee, H. & Neville, K. - "Epoxy Resin", in: Encyclopedia of Polymer Science and Engineering" 6, p.209, A Wiley-Interscience Publication, John Wiley & Sons, Inc., New York , (1967) .
  34. Núñez-Regueira, L.; Gracia-Fernández, C. A. & Gómez-Barreiro, S. - Polymer, 46, p.(2005) , (5979) .
  35. Mortimer, S.; Ryan, A. J. & Stanford, J. L. - Macromolecules, 34, p.(2001) , (2973) .
  36. Ampudia, J.; Larrauri, E.; Gil E. M.; Rodriguez, M. & León, L. M. - Journal of Applied Polymer Science, 71, p.(1999) , (1239) .
  37. Winter, H. H. & Mourns, M. - Advances in Polymer Science, 134, p.165 , (1997) .
  38. De Nograro, F. F.; Guerrero, P.; Corcuera, M. A. & Mondragon, I. - Journal of Applied Polymer Science, 56, p.177 , (1995) .
  39. Pérez, R. J.; "Commercial Epoxy Resin Curing Agents", en: Epoxy Resin Technology, cap.4, Paul F. Bruins, (ed.), Interscience Publishers, John Wiley & Sons, New York , (1968) .
  40. Ritzenthaler, S.; Girard-Reydet, E. & Pascault, J. P. - Polymer, 41, p.(2000) , (6375) .
  41. Martinez, I.; Martin, M.D.; Eceiza, A.; Oyanguren, P. & Mondragon, I. - Polymer, 41, p.(2000) , (1027) .
  42. Choe, Y. & Kim W. - Macromolecular Research, 10, p.259 , (2002) .
  43. Choe, Y.; Kim, M. & Kim W.- Macromolecular Research, 11, p.267 , (2003) .
  44. Gómez, C. M. & Bucknall, C. B. - Polymer, 34, p.(1993) , (2111) .
  45. Galante, M. J.; Oyanguren, P. A.; Andromaque, K.; Frontini, P. M. & Williams, R. J. J. - Polymer International, 48, p.642 , (1999) .
  46. Remiro, P. M.; Riccardi, C. C.; Corcuera, M. A. & Mondragon, I. - Journal of Applied of Polymer Science, 74, p.772 , (1999) .
  47. González Garcia F.; Soares, B. G. & Williams R. J. J. - Polymer International, 51, p.(2002) , (1340) .
  48. González Garcia F. & Soares, B. G. - Polímeros: Ciência e Tecnologia, 13, p.235 , (2003) .
  49. Blanco, M.; Corcuera, M. A.; Riccardi, C. C. & Mondragon, I. - Polymer, 46, p.(2005) , (7889) .
  50. Urbaczewski-Espuche, E.; Galy, J.; Gerard, J. F.; Pascault, J. P. & Sautereau, H. - Polymer Engineering and Science, 31, p.(1991) , (1572) .
  51. Won, Y.; Galy, J.; Gérard, J. F.; Pascault, J. P.; Bellenger, V. & Verdu, J. - Polymer, 31, p.(1990) , (1787) .
  52. Dušek, K. & Dušcová-Smr·ková, M. - Progress in Polymer Science, 25, p.(2000) , (1215) .
  53. Sabra, A.; Pascault, J. P. & Seytre, G. - Journal of Applied of Polymer Science, 32, p.(1986) , (5147) .
  54. Galy, J.; Sabra, A. & Pascault, J. P. - Polymer Engineering and Science, 26, p.(1986) , (1514) .
  55. Dodiuk, H. & Kenig, S. - Progress in Polymer Science, 19, p.439 , (1994) .
  56. Pearson, R. A. & Yee, A. F. - Journal Materials Science, 26, p.(1991) , (3828) .
  57. Pearson, R. A. & Yee, A. F. - Journal Materials Science, 21, p.(1986) , (2462) .
  58. Kin, D. S.; Cho, K.; Kim, K. & Park, C. E. - Polymer Engineering and Science, 36, p.755 , (1996) .
  59. Arias, M. L.; Frontini, P. M. & Williams, R. J. J. - Polymer, 44, p.(2003) , (1537) .
  60. Iijima, T.; Yoshioka, N. & Tomoi, M. - European Polymer Journal, 28, p.573 , (1992) .
  61. Pearson, R. A. & Yee, A. F. - Journal Materials Science, 24, p.(1989) , (2751) .
Expand